Troubleshooting Cyclops Spotlight That Won’t Charge

Disclaimer: “As an Amazon Associate, I earn from qualifying purchases. Without Any Extra Cost to You!”

Cyclops spotlights have fantastic features, and mainly they are used at night when there is darkness. Cyclop’s spotlight can be troublesome, especially when left for long without using and charging. Moreover, they come in different sizes with different brightness. Some Cyclops spotlights use monitor sensors and function according to the settings made.

Several reasons can result in your spotlight not to charge. For instance, if your battery is dead, the charger is damaged; the spotlight is hibernating after a long time before using it, among other reasons.

Steps of how to troubleshoot cyclops spotlight that is not charging

Cyclops spotlight not charging is a common problem that is caused by many reasons. Therefore, troubleshooting the issues improves the charging efficiency of the cyclops spotlight.

Step 1: inspect your cyclops spotlight plugin

Check your cyclops spotlight plugin if it is in good condition or damaged. First, ensure that the connector is wholly attached to the plugin and light will be produced. If the light is not produced when a plug is correctly connected, then the connector is damaged. Try fixing your plugin and the connectors correctly and connect again to see if the light is produced. If your connector is badly damaged, it is advisable to replace it.

cyclops spotlight

Step 2: Check your cyclops spotlight battery if it is in good condition

Spotlight battery usually uses PCB. PCB protects the cyclops battery from the total current that can damage the spotlight. Check if your battery is in a good state together with the charging unit. If the battery is terrible, the micro USB cannot support it. Check the battery using a minimum meter once your spotlight stops charging. Checking your battery saves you money and protects your cyclops battery.

Step 3: inspect your battery to identify if it is hibernating

When your battery is not charging, it may be due to the spotlight being in hibernating mode, meaning that your spotlight has stayed for a very long time without being used and charged and when you are charging it, no LED lights are lit it is not charging. Therefore, check your spotlight hibernation mode and try getting it out of the hibernation mode. 

To get your spotlight out of hibernation mode, try powering up your battery and red light is produced. Leave the red light produced for about 3 to 5 minutes. Bring your spotlight to charging and leave it for several hours to charge while the battery is still in place. When charging, hibernation mode is removed.

When you plan not to use your cyclops spotlight for a very long time, ensure you store your spotlight batteries well. Ensure you keep them between 40 percent and 65 percent. Also, check the batteries frequently using a battery checker to ensure they are in good condition.

Step 4: Check your spotlight if the circuit breaker has a short circuit

Once you stop charging your cyclops spotlight for a long time, your circuit breaker is automatically short-circuited. If your circuit breaker trips immediately, you switch on your spotlight or plug it into charging, which means your spotlight has been short-circuited.

To fix the problem, ensure you check your circuit breaker resistance by checking it short-circuited. A multimeter is used to test your spotlight to identify if there is a short circuit.

 Locate the position of the short-circuit in the spotlight. Try fixing by removing short-circuits.

Step 5: Inspect your spotlight charger if it is damaged

Your spotlight will not charge if you have a damaged or blown-out charger. Inspect your charger closely to see if the wiring is correct and if the wires are loosely attached to other parts of the charger. Try tightening the loose cables and try using the charger to see if the spotlight will charge.

If it fails, buy a new charger or try using a different charger to charge the spotlight. If the sport starts charging, then the charger’s problem, but if it fails, look for other reasons that may cause the spotlight not to charge.

Step 6: Check spotlight batteries if they are dead

Checking your spotlight battery is a crucial thing that will help you determine the battery state. When you have not used your battery for a couple of months, your battery dies slowly. 

Firstly, put your spotlight to charge and wait until the charging time is over. After that, use a micro-USB charger to know if your battery is in a good state by connecting it to the battery charging port. If red and green lights are lit up, your battery is in good condition, but if the lights are not lit up, your battery is dead and needs replacement.

Considerations when using your cyclops spotlight

  1. Ensure that your battery is not depleted to 0%. Depletion can result in the battery dying. It is advisable to keep recharging your spotlight battery once you have received a low battery warning.
  2. Purchase spotlight battery of high quality. Low-quality batteries get damaged or depleted faster than batteries of high quality.
  3. Check your spotlight frequently to identify any problems and try fixing them early enough. Frequent inspection of your spotlight prolongs the lifespan of your spotlight and improves its efficiency.
  4. Avoid using non-cyclops batteries because they damage your spotlight.
  5. Ensure you follow the manufacturer’s instructions anytime you want to troubleshoot problems affecting your battery.

Frequently asked questions

How can I develop firmware for my cyclops battery?

You don’t need to develop firmware on your spotlight because it is already developed and updated your battery.

How long do cyclops spotlight batteries last?

The lifespan of the batteries depends on how you maintain them. It can last up to a year.

Conclusion

Failure of your spotlight not charging can make you have difficulties in troubleshooting it. From the above information, you have known possible causes of your cyclops spotlight not charging and how you can fix the problems. The steps will help you get your spotlight charging again, and they are easy to understand and simple to apply.

Frequently check your spotlight and identify any problems affecting your spotlight, for example, a dead battery and a blown-out charger. Finally, follow the manufacturer’s instructions to avoid damaging your battery.

Leave a Comment