Focal Vs B&W – Quick Comparison

Disclaimer: “As an Amazon Associate, I earn from qualifying purchases. Without Any Extra Cost to You!”

Speakers exist in different forms and are of various types and are found in many places such as vehicles, mobile phones, home theaters, among other places. The speakers include; Focal, Bowers and Wilkins, QSC, Quested, among others. B&W speakers are used in any speaker, home theater, and headphones.

B&W speakers exist in many forms, such as formation bass, M-1, among others. Focal speakers connect many devices such as headphones, vehicles, home theater speakers, among others. Customers’ reviews show that Focal speakers are the best since they take over all activities involving the loudspeakers processing process. B&W speakers differ from focal speakers.

Table of Contents

Features of both Focal and B&W

Focal and B&W speakers have similarities and differences. Each speaker has its features despite its similarities and differences. The features are as shown below.

Focal And B&W Features

1. Sensitivity feature

High-sensitive speakers usually produce a loud sound when compared to low-sensitive speakers. Focal and B&W speaker’s sensitivity varies for instance; Focal speakers are more sensitive than B&W speakers. Although both speakers have the same resistance of approximately 7 to 9 ohms, their sensitivity varies from each other.

When speakers use the exact amount of power supply, Focal speakers connect and play louder than other speakers such as B&W and Quested. For example, focal speakers are 88DB sensitive while B&W are 90DW sensitive. Therefore, it is advisable to consider the sensitivity of a speaker before purchasing to match your preferences.

2. Frequency range

Focal and B&W speakers support the same frequency range, but sometimes, the range may differ. Focal speakers support frequencies up to 55k Hz, while the B&W speakers support a frequency of up to 52Hz. Although the frequencies vary in the end, they both begin at a low frequency of approximately 28k Hz.

3. Heaviness

Each speaker has its weight where the focal speaker is heavier than the B&W speaker. The focal speaker weighs approximately 17 to 19lbs, while the B&W speaker weighs about 15.0 to 15.5lbs.

4. Dome tweeter

Each speaker requires a different dome tweeter to function, increasing the speaker’s accuracy while playing. Focal tweeters have one decoupled dome tweeter, while the B&W tweeters are inverted. Decoupled dome tweeters in focal speakers increase the accuracy of the speaker than the inverted dome tweeter.

Moreover, the inverted dome tweeter is more accurate than the B&W speaker since the two speakers use the required electric and electric equipment. In addition to that, both speakers have two-way speakers, resulting in loud sound production when playing music, among others.

Decouple dome tweeter in focal speakers mainly uses woofers known as continuum woofers, while the B&W uses polyglass woofer to produce loud noise to the surrounding.

5. Watts used by both speakers

The power range in the two speakers is different, whereby focal speakers use the power supply of at least 24 watts and at most 125 watts. Bowers & Wilkins speaker uses a power supply of approximately 28 to 127 watts.

Power usage in both speakers does not affect the amount of sound produced by each speaker. When purchasing a speaker such as a Focal speaker, consider the power supply, frequency range, and other features to gain the best speaker for your desired area, whether home, vehicles, or headphones. Also, consider consulting any manufacturer to help you buy a speaker of your best choice.

6. Cost

In terms of cost, focal speakers are more expensive than B&W speakers because the focal is made of costly materials, including decoupling tweeters and diamonds. The materials make them strong, unlike B&W, which are fragile in that they quickly get damaged.

Moreover, the focal is much easier to use, while the B&W is a bit challenging and requires a lot of understanding before using them. In addition to that, it is advisable to follow the manufacturer’s instructions while using the speakers, whether in your vehicle, home theater, headphones, or any place.

How to connect B&W speakers and Focal speakers

There are many processes in which you can connect the two speakers. First, you can use Bluetooth to connect the two speakers, manual wiring using the recommended cable, among others.

Wiring focal speakers in your car

The following steps will help you wire or connect your focal speakers in your car or vehicle.

Collect all components required

Assemble all materials required to connect your focal speaker. The equipment necessary includes; focal speaker, tweeter circuit, etc.

Create a connection between the focal speaker and your device

Establish a connection to bring your focal speaker into functioning. The link depends on the type of cable you are using. For instance, some prefer using a USB cable, while others prefer an audio cable. If you are using a USB cable, connect the cable to the focal speaker and attempt turning on the speaker to see if it is playing as required.

However, if you are using an audio cable, connect the audio cable to your device, such as a mobile phone, headphones among others. The audio cable contains different terminals that enable you to fit both the speaker and your device correctly.

Also, you can connect the speaker using Bluetooth. Before using Bluetooth, first, ensure that both Bluetooth are on and have paired successfully. Using Bluetooth is much easier than manual wiring because manual wiring at times can damage your device speaker. Also, ensure that you power on the speaker after establishing the connection and test the focal speaker if it is playing perfectly.

B&W speakers and Focal speakers

How to connect Bowers & Wilkins speakers

If your speaker contains Bluetooth, the following steps will guide you through establishing a connection between your device and the speakers.

  1. Turn on both Bluetooth. First, bring your B&W device and turn its Bluetooth on. Also, turn on the Bluetooth of your car.
  2. Allow both devices to pair and connect successfully.
  3. Confirm if the devices have been connected successfully by playing any audio music.

If your car lacks Bluetooth, use an audio cable to establish a connection. Ensure you use the correct audio adapter to protect your device’s speaker from any distortion. The following steps show how to connect B&W headphones to your vehicle device, such as a car TV.

  1. Establish a connection whereby you connect the adapter to the power source. The adapter that is commonly used is the Bluetooth adapter.
  2. After connecting the Bluetooth adapter to the power source, create a connection between the Bluetooth device and your vehicle’s speaker. Moreover, remember to make references to the manufacturer’s handbook to confirm if the link is successful.
  3. Connect your B&W headphones by turning on the Bluetooth and allowing the headphones to connect with the Bluetooth adapter successfully. It is advisable to keep your B&W headphones close to the Bluetooth adapter since Bluetooth only supports a limited frequency range.
  4. Connect your vehicle TV by going to the TV settings and choosing the best option to connect the headphones and the TV. For instance, PCM settings are preferred since they allow your B&W headphones to connect successfully with the vehicle TV.


In conclusion, focal and B&W have different features. For instance, focal points are louder than the B&W, and they are more sensitive than other speakers. Moreover, focal is strong, unlike B&W, which are considered fragile because of their invisible tweeter.

Sometimes, you may wish to connect a focal or B&W to listen to music while driving. The information above describes the methods and the steps you can use to establish the connection. Finally, it is advisable to follow the manufacturer’s instructions while establishing a connection, especially when using an audio adapter cable.

Leave a Comment